Duo liquid samplers

Duo Liquid Samplers

For taking both cross-sectional and target samples.

• Individually manufactured and packaged in our clean room
• Fully traceable and FDA, EU 10/2011 & EC 1935/2004 compliant
• Available in sterile (gamma-irradiated) and non-sterile versions
• Colour: white
• Quantity per box: 20

 

Instructions for use - Targeted sample :

1. Close the top valve.
2. Insert the sampler into the liquid up to the desired point.
3. Pull the top valve to open and allow the liquid to enter the pipe.
4. Press the top valve to close it.
5. Remove the sampler and empty it into a suitable container.

Instructions for use - Cross-section sample :

1. Open the top and bottom valves.
2. Insert the tube into the container until it reaches the bottom. 
3. Push the hose against the bottom of the container to close the bottom valve. Press with your thumb to close the top valve. Make sure that the liquid is trapped in the tube.
4.Remove the sampler and empty it into a suitable container by opening the top and bottom valves.

Non sterile

Reference	Volume	Total length	Material
S15-8921H-450	80 mL	450 mm	HDPE
S15-8921H-1100	225 mL	1100 mm	HDPE